Ozone 1000 Meter

Ozone 1000 Meter

The Palintest 1000 Ozone Meter provides a simple means of measuring ozone residuals up to a level of 2.0 mg/l. Used in conjunction with the Palintest DPD method, it provides a level of simplicity and accuracy unrivalled in a portable, hand-held instrument.

Ozone is used for the disinfection of swimming pool water and in many other water treatment systems. In swimming pool water treatment, ozone is normally introduced into the circulation system and then removed prior to the re-entry of the water to the pool. In other water treatment systems, an ozone residual may be maintained in the water. In all cases, accurate measurement of ozone residual is essential for the control of the system or to ensure that the ozone has been removed.

The Palintest 1000 Ozone Meter is ideal for every application. The instrument is equally suitable for bench or field use. For maximum portability, the Ozone Meter is supplied in a soft carrying pouch with a belt loop. The option of a hard carry case is available as an added convenience. It is complete with test tubes, DPD tablets and full operating instructions.

Ordering Information

DescriptionProduct Code
Ozone 1000 MeterComes with the meter in a soft carry case with test tubes, reagents and instructions.PT243/M2
Ozone Meter Check Standards with Test CertificatePT241/M2
Round Test Tubes for Photometer, 10 ml glass (Pack of 5)PT595/5
Optional Hard Carry Case for Single Parameter MetersPT238
Alkaline Battery AA8 PackPT265

Reagents

TestRange (mg/l)DescriptionProduct Code
Ozone0 - 2.0Replacement Reagent Pack (250 tests)AP056

Technical Specifications

Instrument type
Single parameter colorimeter pre-programmed for direct-reading of ozone
Optics
Palintest M2 optical system with pulsed blue green LED, wavelength filter and photodetector
Operating range
0.00 - 2.00 mg/l Ozone
Operating temperature
0 - 40 °C / 32 - 104 °F
Test cells
For use with round test tubes (10ml, 20mm OD 18 mm path length)
Operation
Single button
Blank/Zero setting
Optionally held in memory or reset for each reading
Internal calibration
Factory set. Recalibration through internal software
Instrument case
Splash-proof case with membrane key pad
Power
2 x 1.5V batteries. Power management system with auto-switch off (included)
Size
Instrument only 17 x 7 x 4 cm