Chlordiox Meter 1000

Chlordiox Meter 1000

The Palintest 1000 Chlordioxmeter offers water utilities a new dimension in chlorine dioxide testing. Used in conjunction with the Palintest DPD method, it provides a level of simplicity and accuracy unrivalled in a portable hand-held instrument.

Chlorine dioxide is now increasingly used as a disinfectant for treating water services and cooling systems. Proper control of dosing is essential for economical and effective use of this form of treatment. The Palintest 1000 Chlordioxmeter provides operators with a simple on-site method of measuring chlorine dioxide residuals.

The instrument is equally suitable for bench use in water treatment plants and water works’ laboratories, and for field use by sampling officers and water quality inspectors. For maximum portability, the Chlordioxmeter is supplied in a soft carrying pouch with a belt loop. The option of a hard carry case is available as an added convenience. The Chlordioxmeter is complete with test tubes, DPD tablets and full operating instructions.

Ordering Information

DescriptionProduct Code
Chlordiox 1000 MeterComes with the meter in a soft carry case with test tubes, reagents and instructions.PT247/M2
Chlordiox Check Standards with Test CertificatePT229/M2
Round Test Tubes for Photometer, 10 ml glass (Pack of 5)PT595/5
Optional Hard Carry Case for Single Parameter MetersPT238
Alkaline Battery AA8 PackPT265

Reagents

TestRange (mg/l)DescriptionProduct Code
Chlorine Dioxide (DPD)0 - 4.0Replacement Reagent Pack (250 tests)AP052

Technical Specifications

Instrument type
Pulsed LED colorimeter pre-programmed for direct-reading of chlorine dioxide
Optics
Palintest M2 optical system with pulsed blue green LED, wavelength filter and photodetector
Dual Operating ranges
0 - 4 mg/l Chlorine Dioxide
Resolution
0.01 mg/l
Operating temperature
0 - 40 °C / 32 - 104 °F
Test cells
For use with round test tubes (10ml, 20mm OD 18 mm path length)
Operation
Single button
Blank/Zero setting
Optionally held in memory or reset for each reading
Internal calibration
Factory set. Recalibration through internal software
Instrument case
Splash-proof case with membrane key pad
Power
2 x 1.5V batteries. Power management system with auto-switch off (included)
Size
Instrument only 17 x 7 x 4 cm