Ammonia 1000 Meter

Ammonia 1000 Meter

The Palintest 1000 Ammonia Meter is a precision dual range Photometer for measuring Ammonia concentration in water. The ranges available are 0 - 15 mg/l N and 0 - 50 mg/l N. The single parameter meter is used in conjunction with the Tubetests Nessler reagent. The system provides a quick and simple but accurate way to monitor ammonia levels.

Ammonia occurs as a breakdown product of nitrogenous material in natural waters. It is also found in domestic effluents and certain industrial waste waters. Ammonia is harmful to fish and other forms of aquatic life, and the ammonia level must be carefully controlled in water used for fish farms and aquariums. Ammonia tests are routinely applied for the monitoring of natural water, sea water, and for pollution control on effluents and waste waters.

The reduction of ammonia is an indication of the efficiency of a sewage treatment plant. Treatment plants in the UK will have a Consent to Discharge to receiving water which usually includes a maximum limit for ammonia. This is normally in the range of 10 – 12 mg/l N.

Special Waste Regulations 1996

Palintest Ltd are licensed Special Waste Contractors and registered Special Waste Carriers. We offer a service for the safe collection and disposal of waste Ammonia Nessler Tubetests reagents in the UK.

Ordering Information

DescriptionProduct Code
Ammonia 1000 MeterComes with the meter in a soft carry case with test tubes and instructions. For use only with PL420 and PL424 Tubetests Nessler Reagents. These cannot be purchased online as they need specialist shipping, please contact us to purchase reagents for this product.PT240
Ammonia Meter Check Standards with Test CertificatePT237
Optional Hard Carry Case for Single Parameter MetersPT238
Alkaline Battery AA8 PackPT265

Reagents

TestRange (mg/l)DescriptionProduct Code
Ammonia/15N (Nessler Method)0 - 15 mg/l NReagent Pack (24 tests)PL420
Ammonia/50N (Nessler Method)0 - 50 mg/l NReagent Pack (24 tests)PL424

Technical Specifications

Instrument type
Single beam colorimeter pre-programmed for direct reading
Optics
Integral focused optics with pulsed blue LED
Operation
Two button operation
Blank/Zero setting
Optionally held in memory or reset for each reading
Internal calibration
Factory set. Recalibration through internal software
Instrument case
Splash-proof case with membrane key pad
Temperature range
0 to 40°C
Power supply
2 x 1.5v batteries (included)
Power management system with auto-switch off
Battery life
Approx. 20,000 readings
Size
Pocket sized: 173 x 75/44 x 41 mm